Home / Guides / Pre-purchase boat survey checklist: what to check before you buy

Pre-purchase boat survey checklist: what to check before you buy

A pre-purchase boat survey checklist for buyers and surveyors: paperwork, hull, deck, engines, systems, sea trial and how to record findings with photos.

By the YachtSnags team · Updated 2026-11-22 · 9 min read

A pre-purchase survey is the buyer's best protection. It tells you what you are really buying, gives you leverage to negotiate and is often required by insurers and lenders. Always hire a qualified, independent marine surveyor — this checklist helps buyers prepare and helps surveyors structure their notes. It is not a replacement for a professional survey.

Before the survey

  • Get the builder, model, year, hull identification number (HIN) and engine serial numbers.
  • Ask for registration, ownership history, VAT and duty status, and any outstanding finance or liens.
  • Request service records, previous survey reports and insurance claims history.
  • Agree the sea trial and haul-out in the purchase agreement.

Hull and structure (out of the water)

  • Osmosis blisters, cracks, previous repairs and fairness of the hull.
  • Moisture readings on GRP hulls; corrosion and plate thickness on steel and aluminium.
  • Keel and keel bolts, rudder, bearings and play in the steering.
  • Propellers, shafts, cutless bearings, P-brackets, anodes and through-hulls.
  • Stringers, bulkheads and their bonding inside the hull.

Deck and exterior

  • Teak deck condition, caulking and fastening; soft spots in cored decks.
  • Stanchions, rails, cleats and windlass mounts for movement or leaks.
  • Hatches, portlights and windows for crazing and leaks.
  • Rig, standing and running rigging on sailing yachts.

Engines and machinery

  • Engine hours, oil analysis, cold start, smoke colour, leaks and mounts.
  • Generators, gearboxes, stabilisers, bow and stern thrusters.
  • Exhaust systems, raw-water cooling and impellers.
  • Fuel tanks and lines, filters and separators.

Systems and safety

  • AC and DC electrical: panels, batteries, chargers, shore power, bonding.
  • Plumbing, heads, holding tanks, water makers and pumps.
  • HVAC, galley appliances and gas installations.
  • Navigation and communication electronics.
  • Fire detection and suppression, bilge pumps and alarms, life-saving equipment and expiry dates.

Sea trial

Run at cruising speed and wide-open throttle, check temperatures and pressures, steering response, vibration, and that every system works under load. Note anything that only appears when the boat is running.

Recording findings so they are useful

Every finding should have a location, a photo with the problem marked, a severity and a recommendation (repair now, monitor, or note only). Grouping findings by priority makes negotiation much easier: the buyer can see at a glance what must be fixed before completion.

Marked-up yacht photo showing defects circled and arrowed
Mark the exact spot on the photo so the finding is clear in the report.

Do this on your phone. YachtSnags turns this checklist into a live snag list: photo, mark-up and status for each item, then a branded PDF report in one tap. Download free for Android and iOS.

Start your next inspection in minutes

Free to download on Android and iOS. Works offline on phones and tablets.